The maintenance work of mixing bucket blade should be full and meticulous, and it should be checked regularly. If it is worn seriously, it should be replaced, otherwise it will affect the normal production. Correct repair and maintenance of vulnerable parts can prolong their service life
After each mixing, the blade of the mixing bucket shall be cleaned in time to remove the dirt on the blade of the mixing bucket. The lubricating oil is often dripped between the bucket bearing and the bucket blade, and between the bucket blade and the petiole. Timely derusting and anti rusting treatment shall be carried out on the blade of the mixing bucket to avoid rusting and corrosion of the blade due to untimely maintenance.
Regularly check the abrasion and consumption degree of the mixing bucket blade and the welding place between the mixing bucket blade and the blade handle, record the abnormal phenomena found and select the corresponding solutions. In addition, it is also very necessary to check whether the welding point of the blade of the mixing bucket is connected with the bottom, so as to prevent the leakage from causing casualties. The distance between blade and liner is also one of the data to be carefully checked and recorded.
Before the start of each shift, the mixing bucket should be idled for two to three minutes to check whether the blade of the mixing bucket is firm and normal. If abnormal sound or parts fall during the operation, it should be eliminated quickly under the condition of paying attention to safety. When idling, the maintenance personnel and construction personnel should stay away from the outlet direction of the mixing bucket as far as possible, so as to avoid casualties caused by parts flying out.
The blade of mixing bucket shall be subject to wear resistance treatment regularly to increase the wear resistance of mixer blade.