1、 The tank has small inclination angle, low center of gravity and stable driving and rotation
The tank body adopts German schweining process, and is specially optimized according to different chassis. Special tooling is adopted to ensure that the tank body has small inclination angle, lower center of gravity and is not easy to roll over. The welding area is reduced and the strength of the mixing tank is greatly increased. The steel adopts advanced plasma cutting technology to ensure the production efficiency and reduce the deformation error of steel due to heat.
2、 Excellent mixing, feeding and discharging performance
The head, cylinder and blade are made of Q345 alloy steel, with good wear resistance and yield strength and long service life. The blade adopts double logarithm, Archimedes helix, excellent mixing performance, feeding speed greater than 2.7 cubic per minute, discharging speed greater than 1.8 cubic per minute, low residual rate.
3、 The subframe has strong torsion resistance
The longitudinal and cross beams of the subframe are made of 16Mn rectangular tubes, which are formed in one piece without welding. The key stressed parts are of cable-stayed structure, so that the frame has strong torsion resistance and tear resistance. The connection structure between the subframe and the chassis is reliable, which reduces the impact of the torsion of the upper part on the chassis and extends the service life of the chassis.
4、 Feeding and discharging system
The feeding hopper has large space and reasonable design angle, so the feeding speed is accelerated, and it is not easy to block and overflow. The chute can rotate 180 degrees, with a limiting device, which can be adjusted up, down, left and right. It is equipped with a locking device, which can be fixed and locked in the process of vehicle driving to ensure safe and reliable driving.
5、 Hydraulic system
The hydraulic transmission system adopts the world famous brands in the field of fluid power: ZF, PMP, Bonfiglioli, Rexroth, Eaton, Danfoss, etc., so as to inherit the high-quality reliability.
6、 Control system
The control system adopts the rod control system with accurate positioning and reliable control. The control points are in the cab and on both sides of the rear of the car. The control system has compact structure, flexible operation and reliable control.