As a means of transportation, the concrete mixer must comply with the regulations of the Ministry of transportation in terms of maintenance and repair. Combined with the actual situation of concrete mixer, maintenance and repair should be carried out. In terms of daily maintenance, the concrete mixer truck should not only maintain the engine, chassis and other parts as usual, but also carry out the following maintenance work.
1. Reasonably determine the protection period: automobile protection period refers to the distance, mileage or time of automobile protection. In the process of practical application, the owner should refer to the protection cycle recommended by the automobile manufacturer, contact the vehicle's own skills and use conditions, and adjust the protection cycle appropriately. Generally speaking, new cars are used under higher road conditions and do not need to be protected too often. The protection period of the manufacturer's rule can be used as the upper limit. However, if the vehicle technology or application conditions are poor, the protection period should be appropriately shortened.
2. Make full use of free inspection: free inspection activities initiated by concrete mixer manufacturers are usually beneficial to owners. Car owners can use these inspection activities to carry out specific physical examination on their favorite cars, so as to find and eliminate some potential problems in real time, and then save them. High maintenance and protection costs can be seen in the future.
3. Fault of miniaturization maintenance assembly: many owners of concrete mixer have this feeling. They hope that certain components of the car will get out of control after the crash and maintenance, leading to the car entering the maintenance period too early. The reason for this kind of sight mainly involves the assembly skills of maintenance personnel and the quality of accessories. Therefore, it is necessary to prevent the maintenance assembly from failure, apply various advanced technical protection equipment and techniques to protect the vehicle from disassembly, so as to prevent unnecessary damage to the vehicle assembly and parts, improve the protection quality, and then reduce the total maintenance cost.
In addition to the above knowledge, after transporting the concrete in the concrete mixing test, the inside of the mixing bucket is usually washed with water to prevent the hardened concrete from occupying the space and reduce the volume of the mixing bucket. The reasonable operation and maintenance of the equipment will effectively prevent the good performance of the equipment in the construction process.
The above is Zhongke mixer http://www.govcov.com Thank you for checking our company's information in your busy schedule. If you want to know more, you are welcome to inquire!