A serious inspection, timely handling of fault detection
It is not allowed that heavy vehicles break down on the road, otherwise it will be troublesome to have a stuffy tank. Generally, the concrete tank can not be stopped for more than two hours, and the C40 concrete can not be stopped basically.
Check the engine oil, antifreeze, lubricating oil and cooling water before ignition. If it is found that it is not enough, add it again.
After the small concrete mixer truck is started, let the jar rotate at low speed, and check the tire pressure around the truck to see if there is a leaking tire, and then use a screwdriver to remove the gravel in the tire gap to check.
Is there a nail or something stuck in the tire.
Then check the lights, especially the waist lights, to make sure that they shine on the edge of the tire. The construction site will often pile up things like steel bars, and the sidewall is relatively weak.
Clean the mirrors and windows on both sides with a towel. The road conditions on the construction site are complex and the light is not very good. The vision must be ensured first!
Second, make sure there is enough water in the water tank and water reducer
Because of various reasons, the material is too dry, there is no water and the material can not be discharged, the water reducer is the life-saving straw.
3. Confirm that the mixing tank of the small concrete mixer is in the stop state
When the engine is running, if the can is in a high-speed rotating state, the instantaneous force will be very large, which will damage the reducer.
Small concrete mixer will transport the concrete and provide mixing function. In this way, the concrete will be very soft and not easy to dry. Before driving, be sure to check the condition of the mixer. For example, whether the steering wheel tire is normal or not. If it is clear that there is no problem, drive it later. Be sure to watch the road carefully during driving.