1. Keep the rated load of the automatic feeding mixer
The nature and size of the load of such construction machinery and equipment have an important impact on the loss of equipment parts. The wear of general mechanical parts will increase with the increase of load. When the load borne by parts is higher than the designed working load, the wear of parts will continue to increase.
2. Clean in time to reduce the impact of mechanical impurities on the equipment
Mechanical impurities generally refer to dust, soil and other substances and some metal chips and oil dirt produced by construction machinery in the process of use. Once these impurities reach the working surface of the machine, the harm is great: not only increase the friction force, fuel consumption. And it will damage the lubricating oil film and scratch the mating surface.
3. Prevention of parts corrosion of automatic feeding mixer
Corrosion on parts, sometimes not easy to be found, easy to be ignored, more harmful. Rain water, chemical substances in the air and so on penetrate into the machinery through the pipes and crevices of the mechanical parts and corrode the parts. If the corroded parts continue to work, the mechanical wear will be accelerated and the mechanical failure will be increased. This requires managers and operators to take reasonable construction arrangements according to the local weather conditions and site conditions, so as to minimize the harm of chemical corrosion on mechanical parts.
4. Keep the reasonable temperature of the parts of the automatic feeding mixer
In operation, the temperature of each component has its own normal range. Too high or too low temperature will affect the strength of parts, so it is necessary to control the temperature of some parts with coolant and lubricating oil to make them work in a reasonable temperature range.