1、 What is the mixer tug for?
Mixer tug is a bearing, used to support the tank, and mixer is one, auxiliary mixing.
2、 How to change oil for hydraulic pump of mixer truck?
Generally, it is not recommended to replace it by yourself, but directly go to the after-sales point to find a technician to replace it, and the oil used must meet the requirements, otherwise it will cause great damage to the equipment and greatly shorten the service life, so it is necessary to replace the hydraulic oil with reasonable label.
3、 What is the relationship between the filling rate of mixer tank and the inclination angle of tank?
At present, the inclination angle of the mixer is about 12 degrees, and the filling rate is about 63%. It is difficult to measure the inclination angle and calculate the filling rate. At present, the sales of mixer are subject to the mixing volume.
4、 Concrete mixer tank does not turn, turn to open no force and hydraulic oil from the mailbox fuel spout out what is the reason?
The hydraulic pressure goes in and out one by one. If there is no force, the sealing part of the oil pump may be broken. The return oil is flushed. Maybe the sealing pad of the oil pump is broken.
5、 What is the rotational speed of mixer drum?
The rotation speed of the mixing drum during feeding is 6-10 rpm; the rotation speed of the mixing drum during mixing is 6-10 rpm.
6、 What is the distance between the feeding port of 8-12 cubic meters concrete mixer truck and the ground?
Generally, the height of 8-12 square mixer truck is about 3.8 meters, and the distance between the feed port and the ground is about 3.5 meters, which depends on different models.
7、 How to clean the tank of cement mixer?
The water tank equipped with the mixer truck should put the water into the tank after unloading each time. When it returns, it should be stirred and discharged to the mixing station. The surface of the tank should be cleaned when the water tank is filled with water. Of course, it can also be directly cleaned with water in the water tank. If the cement slurry has set, find a special cleaning tank inside the tank, and brush the surface with oxalic acid.
Our website is: http://www.govcov.com We will serve you wholeheartedly and warmly. Welcome to visit!